Type Module 17plus

115 mm
Typ Modul 17 plus von E-T-A: Das Modul 17plus ist ein Montage- und Stromverteilungssystem

特徴

Module 17plus is a power distribution system for use with
- E-T-A Circuit Breakers type 2210-S..., 3600-..., 3900-...
- E-T-A Electronic Circuit Breaker ESS30, ESX10
- Solid State Remote Power Conroller E-1048-S7...

Each module accommodates two single pole plug-in circuit breakers with an individual housing width of only 12.5 mm and fits onto all industry standard mounting rails.

The two-way modules can be mounted side-by-side to provide as many ways as required with a terminal block fitted at each end. A distribution busbar can be fitted on the supply side of the modules, but each pole of multipole circuit breakers must be individually connected.

Electrical connections are by means of screwless spring loaded terminals.

Suitable electro-mechanical circuit breakers have integral make and break auxiliary contacts. Depending on the application these may be used for either single or group signalisation. For group signalisation, the make contacts (which open in the event of a fault) are connected in series to the terminal blocks of the modules. The module is designed to accommodate a probe for series connection continuity tests. When multipole circuit breakers are fitted auxiliary contacts are required for each pole.

Single signalisation is achieved through use of the break contacts (which close in the event of failure) connected in parallel by means of terminals on each module.

Both types of signalisation (single and group signalisation) are available at the same time if the circuit breakers used provide auxiliary contacts (please note when ordering).

The signalling circuitry between modules is automatically connected when the modules are mounted side-by-side (linked together).

技術データ

取付方法 DIN: レール
サーキットプロテクタタイプ 熱動電磁式
電子式
取得規格 UL 60950

アクセサリー

ご注文型式 特徴
SB-S11-P1-01-1-1A

ジャンパ

X21115601

ネジ端子

X22200401

エンドブラケット

X22200501-03

信号用バスバー

01 = 青色

 

02 = 赤色

 

03 = グレー

Y30058111

保持用クリップ(ソケット用)

Y30701601/11

バスバー

Y30775401

保持用クリップ

Y30794261

ラベル

Y30872901

保持用クリップ

Y30879201

保持用クリップ

用途

  • (鉄鋼プラント)
  • Power-D-Box システム
  • オートメーションシステム
  • オートメーション・プロセスコントロール
  • パワーエンジニアリング DC24V
  • 化学、オイル・ガス工場
  • 自動車製造ラインシステム
  • 製薬・食品工場
  • 通信機器、データセンタ

ダウンロード

Datasheet & Explanations